Adding Time-Delay

*Instructions in this article pertain to the SafeWizard II model.

To add time-delay on your SafeWizard:

1. Sign in as Super User/Factory User
2. Select 3 – Admin
3. Select 2 – Access Control
4. Select 1 – Doors
5. Select 1 – Time Delay Doors
6. Select door you wish to set Time Delay using gray soft keys to toggle left/right.
7. “TDL Enabled” – Select Yes to enable
8. Use gray soft keys to toggle down to “Delay Period (min)” – Set minutes desired for delay period. Example 10
9. Use gray soft keys to toggle down to “Open Period (min)” – Set minutes desired for open period. Example 5
10. Select Save