Assigning a User-Key

*Instructions in this article pertain to the SafeWizard I model. Instructions for SafeWizard II may vary slightly.

To assign a user-key on your SafeWizard:

  1. Present your manager key, type in your code and hit “Enter”
  2. Select 3 – Admin ; 1 – Set Up Users ; 2 – Modify User Profile
  3.  Press “NEXT” key to advance through the enrolled until a desired User is found
  4. Press “ENTER and “NO” for change validation mode.
  5. Press “ENTER” 9 times until the screen displays ” Present User’s Key”
  6. Present key to reader port
[]

Was this helpful?