Adding a User-Key

47 0 1 March 25, 2022

*Instructions in this article pertain to the SafeWizard I model. Instructions for SafeWizard II may vary slightly.

  1. Sign in with the manager key and enter PIN
  2. Select 3 – Admin ; 1 – Set Up Users ; Add a New User
  3. Validation Mode 1 -Dallas Key; Present new user key
  4. Enter user name and press ENTER
  5. “Selecting the profile” ; press the NEXT key to advance to the desired profile number
  6. Press ENTER again and the screen will display “PRESENT USER’S KEY”, place the new key to the reader port
[]

Was this helpful?